Thanks to reader pnatan from Tapuz we can do that with just a simple registry tweak.
Introducing OpManager, an enterprise-ready network & datacenter infrastructure monitoring software. Trusted by over a million IT admins worldwide, OpManager monitors Routers, Switches, Firewalls, Physical/Virtual Servers, LAN/WAN traffic, Configuration changes, Apps such as Oracle, SAP, Websphere, etc & other IT devices from a single console. It is easy-to-deploy & use. Try it for FreeDownload FREE 30-Day Trial of ManageEngine OpManager
To configure your computer (tested on Windows 2000, Windows XP and Windows Server 2003) to use both a DHCP obtained IP address and a statically configured IP address follow these steps:
Configure your computer to use DHCP
- Right-click My Network Places and choose Properties.
- On the NIC that is (usually) labeled as Local Area Connection - right-click and choose Properties.
- Select TCP/IP (make sure you don't remove the check mark accidentally) and press the Properties button.
- Make sure you have "Obtain Automatically" selected.
- You can verify your settings by running ipconfig /all at a Command Prompt:
- Ok all the way out.
Add a second (or third and so on), static, IP address
- Click Start and choose Run. Enter Regedit and press Enter.
Note: On Windows 2000 and NT you need to run Regedt32 instead.
- Navigate to
(actual GUID of the NIC may vary, select the one that represents your own NIC (from step 2 above)
- Select the IPAddress key and double click it.
- In the Edit Multi String dialog box enter a second (and third and so on) IP address. Make sure you enter each IP on a separate line. Click Ok.
- Select the SubnetMask key and double click it.
- In the Edit Multi String dialog box enter a second (and third and so on) Subnet Mask. Make sure you enter each Subnet Mask on a separate line. Click Ok.
- Close the registry editor.
- Go back to your network properties, right-click your NIC and select Disable.
- Right-click your NIC and select Enable.
- Verify your settings by running ipconfig /all at a Command Prompt:
Windows 98 users: This trick can also be accomplished with Windows 98, only there you need to modify the following registry path (instead of the one in step 2 above):
In Windows 98 you'll also need to reboot your computer for the trick to work.