[picofly]

Hi all,

Am new to this forum and wish to extend my warm regards to all of you.


Kindly I need assistance in tackling these problems.

1) Allowing Remote desktop connection in cisco router 2811 to windows 2003 server.

2) When browsing on the internet am experiencing TTL Expired on Transit on some websites using the cisco router configs below.

3) I need to share the internet from this Cisco 2811 router to another Cisco 1841 router in our office connected through serial interface that has point to point connection only.

How do tackle remote desktop connection?

Can anyone assist in pointing out the issues with TTL expiring on transit?

How do I share the internet?

The following is my configurations

Building configuration...

Current configuration : 2133 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
service sequence-numbers
!
hostname xxxxxxx
!
boot-start-marker
boot-end-marker
!
logging message-counter syslog
enable secret xxxxxxxxxxxxxxxxxxxxxx
!
no aaa new-model
clock timezone PCTime 3
!
dot11 syslog
ip source-route
!
!
ip cef
!
!
ip name-server 41.x.x.x
ip name-server 41.x.x.x
multilink bundle-name authenticated
!
vpdn enable
!
!
!
!
!
!
username xxxxx privilege 15 password xxxxxxxxxxxx
archive
log config
hidekeys
!
!
!
!
!
interface FastEthernet0/0
ip address 10.x.x.x 255.x.x.x
no ip unreachables
ip nat inside
ip virtual-reassembly
no ip mroute-cache
duplex auto
speed auto
no cdp enable
!
interface FastEthernet0/1
description $ES_LAN$
no ip address
no ip unreachables
no ip mroute-cache
duplex auto
speed auto
pppoe enable
pppoe-client dial-pool-number 1
no cdp enable
!
interface Serial0/0/0
ip address 192.x.x.x 255.x.x.252
ip nat outside
ip virtual-reassembly
encapsulation ppp
!
interface Serial0/0/1
no ip address
shutdown
clock rate 2000000
!
interface Dialer1
ip address negotiated
no ip unreachables
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1452
no ip mroute-cache
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname xxxxxxx
ppp chap password xxxxxxxxxxxxxx
ppp pap sent-username xxxxxx password xxxxxxxxxxxx
ppp ipcp dns request accept
ppp ipcp route default
ppp ipcp address accept
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Serial0/0/0
!
no ip http server
ip http authentication local
no ip http secure-server
!
ip nat inside source list 10 interface Dialer1 overload
ip nat inside source list 101 interface Serial0/0/0 overload
!
ip access-list extended afr_accesslist
!
access-list 10 permit 10.x.x.x x.x.x.255
dialer-list 1 protocol ip permit
no cdp run

!
!
control-plane
!
!
line con 0
line aux 0
line vty 0 4
password xxxxxxxxxxxxxxxxxxxxxx
login
!
scheduler allocate 20000 1000
end

Thank you in advance!