[jasonmichel]

Had a recent cisco voip install and now currently doing a hyper-v and storage network install. However the only free ports we have are on the voice switch. The ports were all configured like this

interface GigabitEthernet1/0/1
description user workstations
switchport voice vlan 10
srr-queue bandwidth share 1 30 35 5
priority-queue out
mls qos trust device cisco-phone
mls qos trust cos
auto qos voip cisco-phone
spanning-tree portfast
service-policy input AUTOQOS-SRND4-CISCOPHONE-POLICY

I created a sub interface on router for an Iscsi Vlan (vlan 5) and the trunk port includes that vlan, can i add that vlan to the interfaces that i have the san/servers plugged in without removing all the voice stuff?

[auglan]

There is no reason to have the voice vlan config on a switchport that isn't going to have a phone connected to it. I would remove it:


default interface gi1/0/1


int gi1/0/1
switchport mode access
switchport access vlan 5
spanning-tree portfast
spanning-tree bpdu-guard enable