Printer Friendly Version
When working with Terminal Server or RDP you have the choice to change the XP RDP 5.1 or 5.2 client connecting port.
SolarWinds NetFlow Traffic Analyzer (NTA) monitors network traffic by capturing flow data from network devices, including Cisco® NetFlow v5 or v9, Juniper® J-Flow, IPFIX, sFlow®, and Huawei NetStream™.
Find the bandwidth hogs by using SolarWinds NTA to identify which users, applications and protocols are consuming the most bandwidth and the IP addresses of the top talkers. Download a full-functional, 30-day trial and in less than an hour, you can fire up network bandwidth monitoring and start getting a comprehensive view of your network traffic and the location of bottlenecks.
For the "old" Windows 2000 Terminal Server client port changes see Use Terminal Server Client to Connect to a Different Port.
If you've changed the listening port on the TS from its' default - 3389 (Change Terminal Server Listening Port)- you'll also need to configure your client to connect to the new port. Changing the connection port on the RDP clients is quite easy.
To Alter the Port on the client side:
- Go to the Start menu and click on Run.
- On the Run menu type MSTSC and click Enter.
- In the RDP window, in the Computer box, scroll to the computer name or IP to which you wish to connect.
- Add a ":Port" (without the quotes) where "Port" is the decimal value of the destination port.
- Press Connect.
Another method of connecting to a different port that default is to run the MSTSC command with the required command line parameters:
/v:ServerName[:Port]
For example:
MSTSC /v:192.168.0.150:3390
Note: To use RDP on computers with operating systems other than Windows XP/2003 you will first need to install the RDP client (Download RDP 5.2).
Related articles
You might also want to read the following related articles:
